One favorite program can be saved into
memory (e.g. your most frequently used
program).
The program can incorporate up to 3
stages (e.g. 2 minutes at 600 W,
followed by 10 minutes at 450 W,
followed by 3 minutes at 300 W).
Programming
(This is an example to set a 3 stage
program.)
^
Select the power level for the first
stage.
^
Select the duration.
^
Press "M".
1 will light up in the display, and 2 will
flash.
^
Select the power level and duration
for the second stage.
^
Press "M" again.
2 will light up in the display, and 3 will
flash.
^
Select the power level and duration
for the third stage. Press the "M"
button.
Once the third stage is complete you
can use the "M" button to scroll through
your entry to confirm that everything is
correct.
^
Once you have finished the
programming, turn the "Power
selector" to the 12 o'clock position.
^
To save the entry start the program.
Do not
run the entire program unless
food is in the microwave.
If there is no food in the appliance
press the "Stop/C" button twice once
the program starts.
1 and 2 stage programs can be
programmed and saved in the same
way. The programming process is
complete when the "Program selector"
is in the 12 o'clock position and the
"Start" button has been pressed, while
pressing the "M" button shows the next
stage.
Changing an entry
^
Once a new program has been
entered the previously saved
program is overridden.
Favorites
28
Summary of Contents for M 8260-1
