Delay start/Time remaining indicator
Time display “H:min”
The Time display has a dual function.
The Delayed start is activated by
pressing the button, or;
It shows the time remaining in the
wash program.
Delay Start
If the “Delay start” lamp is blinking, the
start of the program can be delayed up
to 9 hours and 30 minutes.
Entering the start delay:
– Press the button to the left of the
“Delay start” lamp as many times as
necessary until the desired delay
time appears. Each time the button
is pressed, the time of delay will in-
crease by 30 minutes.
Select the program
– The display will begin counting the
delayed time backwards in one
minute increments.The “Delay start”
lamp will remain lit.
Program start
– When the delay time reaches zero,
the “Time remaining” lamp illumi-
nates, and the “Delay start” lamp
goes out. The duration of the se-
lected program will be shown on the
display.
Deleting the start delay
– When the display reaches “9 h 30
min”, press the button to the left of
the “Delay start” lamp and the start
delay will be deleted.
Remaining time
The remaining time for program com-
pletion is shown in hours and minutes
as soon as:
– A program is selected.
– The time delay reaches zero.
The display counts backwards in 1
minute increments.
Delay start/Time remaining indicator
20
All manuals and user guides at all-guides.com
