Connection to the drain
system
The 5 ft. drain hose may be connected
as follows:
1. Directly into a sink:
hook the hose
over the edge of the sink and secure
it firmly (e.g. by tying the hose to the
water faucet.)
2. To a stand pipe:
place the drain
hose into a 1
1
/
2
" stand pipe and
firmly secure it.
3. To a floor drain:
The machine is
equipped with an airgap/anti-siphon-
ing system so that no minimum drain
height is required.
^
The machine drains using a pump
with a maximum delivery height of
3 ft.
^
Make sure there are no kinks in the
drain hose.
^
If desired, the drain hose may be ex-
tended to run 16 ft maximum as long
as the 3 ft height is not exceeded.
Hose extensions are available from
your dealer or Miele’s Technical Ser-
vice Department.
Plumbing connection
44
