background image

Programme chart

42

Hygiene

In the hygiene programmes, items will be dried with a temperature that is
constant over an extended period (longer temperature holding time). This
temperature holding time kills off micro-organisms such as germs or dust mites
and reduces allergens in the laundry.
If a hygiene programme is cancelled early, micro-organisms will not be killed.
Do not interrupt the programme.

Cottons hygiene

Max. load 4 kg*

Items

Cotton or linen items that come into direct contact with the skin.
These include underwear, baby clothes, bed linen, towels,
bathrobes, spa towels and face washers.

Notes

This programme only dries to the 

Normal

 level.

Minimum iron hygiene

Max. load 4 kg*

Items

– Minimum iron items made of cotton, synthetic, or mixed fibre.

– Workwear, overalls, pullovers, dresses, trousers, leggings and ta-

ble linen.

Notes

This programme only dries to the 

Normal

 level.

Timed drying warm air, hygiene

Max. load 4 kg*

Items

– Jackets, sleeping bags, pillows and other voluminous items.

– Heavy, multi-layered cottons, e.g. table cloths or blankets.

Notes

– For finishing drying multi-layered or voluminous items that dry

unevenly due to their composition.

– For drying a small number of individual garments.

– Do not select the longest drying time to start with. Check the

items as you are drying them to find the optimal time.

Summary of Contents for PDR 507 EL





















































































Reviews: