Operation
55
Setting the start
time
Select a programme.
Press the
OK
button before starting the programme.
Start time
Use the arrow buttons
(higher) and
(lower) to set the hours,
and confirm your selection with the
OK
button.
When the
OK
button is pressed, the display jumps automatically to
the next input position. You cannot go back to the previous entry. If a
mistake is made, the process must be cancelled using the
button
and repeated.
Set the minutes using the arrow buttons
(higher) and
(lower),
and save your entry with
OK
.
The start time is now saved and can be changed as described at any
time up to activation of delay start.
Activating delay
start
Delay start is activated with the
Start/Stop
button.
Universal
Temperature
Switch on at
12:30
75 °C
The selected programme with the set start time is then shown on the
display. If automatic deactivation has been selected (see “Further
settings/Switch off after”), the machine will switch itself off after the
set time until the programme start time is reached.
Deactivating delay
start
Press the
button or switch the machine off using the
button.
