Miele PM 1210, Operating Instructions Manual

en-CA - Warning and Safety instructions

4

This rotary iron complies with current safety requirements. Inappropriate use can, how‐

ever, lead to personal injury and damage to property.
To avoid the risk of accidents and damage to the rotary iron, please read these instruc‐

tions carefully before using it for the first time. They contain important information on its

safety, use and maintenance.
If other persons are being shown how to operate the rotary iron, they must be given or

informed of these important safety Instructions.
Keep these instructions in a safe place and ensure that new users are familiar with the

content. Pass them on to any future owner.

Correct application

This rotary iron must be used as described in these instructions and must be checked on a

regular basis to make sure it is functioning correctly. Maintenance must be carried out

when necessary.

 

This rotary iron is only intended for ironing fabrics that were washed in water, and which

have a care label stating that the article is suitable for machine ironing.

 

This rotary iron is a commercial machine. It is not intended for use in the domestic envi‐

ronment. If the rotary iron is operated in a publically accessible place, it is the supervisor's

responsibility to ensure suitable measures are in place to protect users from any source of

risk or danger.

 

This rotary iron is not intended for outdoor use.

Technical and electrical safety

 

This rotary iron should not be operated in the same room as dry-cleaning equipment us‐

ing solvents containing PERC or CFCs.

 

The rotary iron should only be operated in a suitable dry room.

 

Only operate the rotary iron when all removable outer casings are in place so that it is

impossible to touch an electrical, moving, or heated component.

 

Do not damage, remove, or bypass the safety components or control elements of the

rotary iron.

 

Do not make any alterations to the ironer, unless authorized to do so by Miele.

 

If the controls or the electrical cabling insulation has been damaged, the rotary iron

must not be used until it has been repaired.

 

Repair and maintenance work should be performed by a Miele service technician. Work

by unqualified persons could be dangerous.

 

Defective components should only be replaced by genuine Miele original spare parts.

Only with original Miele parts can the manufacturer guarantee the safety of the appliance.

 

The electrical safety of this rotary iron can only be guaranteed when connected to a cor‐

rectly installed earthing system on site. It is most important that this standard safety re‐

quirement is present and tested regularly. If in any doubt, please have the on-site electrical

system tested by a qualified electrician. Miele cannot be held liable for damage or injury

cased by the lack or inadequacy of an effective earthing system.