Installing several ProLine elements
44
Calculating the worktop cut-out
The frames of the ProLine elements overlap the worktop at the outside right and
left by 8 mm on each side.
Add up the widths of the ProLine elements and subtract 16 mm from this sum.
Example:
288 mm + 288 mm + 380 mm = 956 mm - 16 mm = 940 mm
The ProLine elements are 288 mm, 380 mm or 576 mm wide depending on
model (see “Building-in dimensions”).
Spacer bars
When installing several ProLine elements, a spacer bar must be fitted in between
the individual elements. The position for securing the spacer bar will depend on
the width of the ProLine element.
