Washing without dispenser compartment
24
Amount to be dispensed
Please follow the detergent manufacturer's instructions.
It is particularly important to observe manufacturer's instructions
when using a combination of cleaning agents and special applica-
tion products. Products must only be used for applications ap-
proved by the manufacturer to avoid any material damage or the
occurrence of strong chemical reactions. Confirmation must be
sought from the detergent manufacturer that using the agent in the
washing machine will not cause damage.
Correct dosage also depends on the viscosity of the liquid agent. It
should therefore be allowed to settle to room temperature before be-
ing used.
Commissioning the dispensing pumps
Before the liquid dispensing pumps can be used the liquid agent
must be drawn into the system and the amount to be dispensed set.
Continuing the programme after a "Dispensing system
fault" message
When the dispenser is empty, the pump and the machine switch
themselves off and the washing machine indicates a lack of liquid
agent.
Dispensing system fault
Fill dispenser ??.
Press the start button.
Fill the dispenser container.
Press the "Start" button to continue the programme.
Summary of Contents for PW 413
Page 106: ...106 ...
Page 107: ...107 ...
