Technisches Datenblatt / Technical datasheet: PW 6080 EL AV/LP
Datum / Date: 28.10.2009
Seite / Page: 10
Waste water
Model with dump
valve
Max. temperature
°C
70
Machine waste water connection (external diameter)
mm
75 [DN 70]
On-site drain (internal diameter)
mm
75 [sleeve DN 70]
Max. transient throughput
l/min
62
Vented drainage required. If ventilation is insufficient, fit Miele
kit, Mat. no. 05238090.
Drain manifolds serving several machines must be of
sufficient cross-section.
Drainage via
drain pump
Max. temperature
°C
70
Drain hose (inner diameter)
mm
22 [DN 22]
On-site hose sleeve for drain hose
(inner diameter x length)
mm
22 × 30
Max. transient throughput
l/min
26
Max. head height (measured from base of unit)
mm
1000
Vented drainage required. If ventilation is insufficient, fit Miele
kit, Mat. no. 05238090. .
Drain manifolds serving several machines must be of
sufficient cross-section.
Fittings
(supplied)
Miele plinth UG/UO 6008
4 × fasteners (to secure machine to plinth)
4 × screws DIN 571 (Ø × length)
mm
8 × 65
4 × rawl plugs (Ø × length)
mm
12 × 60
Machine must be bolted to the floor!
Fixing materials for floating screed floor to be provided on site
Miele plinth US 6008
4 × fasteners (to secure machine to plinth)
4 × screws DIN 571 (Ø × length)
mm
6 × 50
4 × rawl plugs (Ø × length)
mm
8 × 40
Machine must be bolted to the floor!
Fixing materials for floating screed floor to be provided on site
On concrete plinth
2 × metal brackets
2 × screws DIN 571 (Ø × length)
mm
6 × 50
2 × rawl plugs (Ø × length)
mm
8 × 40
Machine must be bolted to the floor!
Fixing materials for floating screed floor to be provided on site
Machine data
Machine width
mm
700
Machine depth
mm
727
Machine height
mm
1020
Casing width
mm
692
Casing depth
mm
690
Min. access width to installation site
mm
720
Minimum rear wall gap (measured to front of machine)
mm
1100
Minimum wall gap (to front edge of machine)
With an installation with the minimum gap, additional work
may be required when service or repair work is necessary.
mm
900
Net weight
kg
140
Dynamic floor load, max.
N
2600
Static floor load, max.
N
1850
Dynamic load, max.
N
750
Drum frequency, max.
Hz
22
Average heat dissipation
(dependent on ambient room temperature and programme
selected)
W
Not yet available
Sound pressure level (re 20 mPa),
(measured at a distance of 1 m from the machine and at a
height of 1.6 m)
dB (A)
<70
Installation should only be carried out by authorised fitters in accordance with valid regulations!
Observe installation instructions when installing machine! All rights reserved! Dimensions in mm
