Electrical connection must comply with national regulations.
Connection using multi-pole wall lockable socket in compli-
ance with IEC/EN 60309 and IEC/EN 60947 is recommended
in order to simplify electrical tests. If machines are hard-wired,
a multi-pole mains switch must be provided on site. Switches
with a contact gap of more than 3 mm can be used. These
include switches, fuses and contactors (IEC/EN 60947). A
wall socket or mains isolator must be easily accessible after
installation.
Reinstallation of the supply point, changes to the equipment
or checks on the protective conductor, including determination
of correct fuse rating, should only be performed by a properly
trained electrician.
If necessary, equipotential bonding with good galvanic contact
must be provided in accordance with all appropriate national
and local regulations.
Cold water
(Soft water)
Min. flow pressure
14.5 psi
100 kPa
Max. pressure
145 psi
1000 kPa
Max. throughput
2.9 gal/min
11 l/min
On-site connection thread
3/4
" garden
hose thread,
male
3/4
" garden hose
thread, male
61
''
1550 mm
approx.
18.5
gal/hr
approx. 70 l/hr
Length of connection hose
(supplied: 1 connection hose)
Hourly water demand (average for 60°C program) for stand-
ard connection (with hot
and
cold water)
If hot water supply is not available
,
connect hot water
inlet to cold water inlet.
Hot
water
(Soft water)
Max. temperature
158°F
70 °C
Min. flow pressure
14.5 psi
100 kPa
Max. pressure
145 psi
1000 kPa
Max. throughput
2.9 gal/min
11 l/min
On-site connection thread
3/4
" garden
hose thread,
male
3/4
" garden hose
thread, male
6
1''
1550 mm
Length of connection hose
(supplied: 1 connection hose)
Hourly water demand (average for 60°C
−
program)
approx. 18.5
gal/hr
approx. 70 l/hr
When reprogrammed by Miele Service, the
Machine can
also
be connected to a hot water supply line with a
temperature of 70
°C
(158 °F)
to max. 85
°C
(185 °F)
. This
requires a separate inlet hose. This additional inlet hose is
available from Miele.
Technical datasheet: PW 6080 LP/AV
Date:
2015-
Sep
-
02
Page: 1
4
Summary of Contents for PW 6080 EL
Page 8: ...PW 6080 EL measurements in millimeters 8 ...
Page 9: ... Version with drain pump LP PW 6080 EL measurements in millimeters 9 ...
Page 10: ...Version with drain valve AV PW 6080 EL measurements in millimeters 10 ...
Page 11: ...PW 6080 EL measurements in millimeters 11 ...
