Worktop cut-out for onset installation
51
Information for calculating the cut-out
The elements overlap the worktop by 10 mm.
When installing several elements, a distance of 2 mm must be observed between
the individual elements.
Calculating cut-out dimension
B
1 element = width of the element minus 10 mm on the right, minus 10 mm on the
left
Several elements = total width of the elements plus 2 mm distance between the
elements, minus 10 mm on the right, minus 10 mm on the left.
Some examples are illustrated below.
Summary of Contents for SmartLine CS 7632
Page 49: ...Building in dimensions 49 Onset installation a Front b Mains connection cable L 2000 mm ...
Page 64: ......
Page 65: ......
Page 66: ......