Electrical connection
61
Risk of damage from incorrect
connection.
Unauthorised installation, mainten-
ance and repairs can cause consid-
erable danger for the user.
Miele cannot be held liable for dam-
age or injury caused by unauthorised
installation, maintenance or repair
work, or by an inadequate or faulty
on-site earthing system (e.g. electric
shock).
This SmartLine element must be
connected to the electrical supply by
a qualified electrician.
The electrician must be familiar with
and comply with the national regula-
tions and any additional regulations
of the local electricity provider (e.g.
BS 7671 in the UK).
After installation, ensure that all elec-
trical components are shielded and
cannot be accessed by users.
Total power rating
See data plate
Connection data
The connection data is quoted on the
data plate. Please ensure these match
the household mains supply.
Residual current device
For extra safety, it is advisable to pro-
tect the SmartLine element with a suit-
able residual current device (RCD) with
a trip range of 30 mA.
Disconnecting devices
It must be possible to disconnect the
SmartLine element from the mains at all
poles using disconnecting devices! A
contact distance of at least 3 mm must
be observed in the switched-off state!
The disconnecting devices are overcur-
rent protection devices and residual
current protection devices.
Summary of Contents for SmartLine CS 7632
Page 49: ...Building in dimensions 49 Onset installation a Front b Mains connection cable L 2000 mm ...
Page 64: ......
Page 65: ......
Page 66: ......