Delay start
44
To select delay start
With delay start you can delay the start
of the programme by up to a maximum
of 24 hours. This allows you, for exam‐
ple, to make use of the cheapest ener‐
gy tariffs.
Please note that the time of day must
be entered correctly for the delay start
function to work.
Cottons
ECO Feedback
2:00 h
10:30
Drying level
Extras
Normal
Start at
After selecting the programme touch
the
Start at
sensor.
Tip:
Via Settings you can select a time
for the programme to finish at, instead
of start at. In this case
Finish at
will light
up in the display.
Start at
OK
08
–
+
: 00
Use the
–
and
+
sensors to set the
time (minutes are set in blocks of 15
minutes).
Confirm each entry by touching the
OK
sensor.
To begin delay start
Touch the flashing
Start/Stop
sensor.
The time at which the programme will
start automatically will appear in the
display.
The drum will turn briefly every hour un‐
til the start of the programme to reduce
creasing.
To change delay start
Touch the
Change
sensor.
Touch the sensor which shows the
programme start time.
You can either start the programme im‐
mediately or change the time:
Touch the appropriate sensor to do
this.
To add/remove laundry after
delay start has started count‐
ing down
You can open the door to add/
remove laundry.
Touch the flashing
Start/Stop
sensor
so that the time continues to count
down.
To cancel delay start
Touch the
Start/Stop
sensor.
Confirm
Cancel delay start
.
Summary of Contents for TMV 840 WP
Page 98: ......
