Final spin speed
Programme
rpm
Automatic
1200
Cottons
1400
Minimum iron/Delicates
1200
Woollens
1200
Silks
400
Express
1400
Dark garments
1200
Shirts
600
Denim
900
Drain/Spin
1400
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons
programme, an additional rinse
is introduced.
To omit the final spin (Rinse hold)
^
Select the
Rinse hold
setting. The
laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
– To start the final spin:
The Rinse hold indicator light will
illuminate. Select the spin speed you
want by pressing the spin speed
button until the indicator light next to
the spin speed you want illuminates.
The washing machine will then start
the final spin.
– To end the programme:
Press the
Door
button. The water will
drain away. Press the
Door
button
again to open the door.
To omit rinse and interim spin and
the final spin
Select the
Without spin
setting. The
laundry is not spun after the final rinse.
The water will drain away and the
machine will go straight into the
anti-crease stage. An additional rinse is
introduced if this settnig is selected
with the
Automatic
,
Cottons
,
Minimum
iron/Delicates
and
Express
programmes.
Spinning
19
