What to do if . . .
With the aid of the following guide, minor problems can be easily corrected
without contacting Miele. Please note that a call-out charge will be applied for
unnecessary service visits where the problem could have been rectified as
described in these Operating instructions.
Please note:
,
Repair work to electrical appliances must only be carried out by a suitably
qualified and competent person in strict accordance with current local and
national safety regulations. Repairs and other work by unqualified persons
could be dangerous. The manufacturer cannot be held liable for unauthorised
work.
The programme does not start
Problem
Possible cause
Remedy
The display remains
dark and the indicator
lights for the
programme buttons
are not lit up.
There is no power to
the machine.
Check whether
– the mains plug is plugged
in and switched on.
– the fuse or circuit breaker
has tripped.
You are asked to enter
a code.
Access via a code has
been activated.
Enter the code and confirm
the entry. Deactivate the code
if you do not wish this
message to appear in the
display the next time the
machine is switched on.
The display is dark.
The display has
switched off
automatically to save
energy (Standby
mode).
Press any button. Standby
comes to an end.
Problem solving guide
42
Summary of Contents for W 5903 WPS
Page 75: ...75 ...