Programming and storing in
memory
The programmable functions are acti-
vated using the additional option but-
tons and the programme selector in
special combinations, which intro-
duce extra features not marked up on
the control panel.
Programming is carried out in four
steps:
1. Select programming mode
2. Select programmable function
3. Activate or deactivate programmable
function
4. Store the programmable function in
memory
1. Selecting programming mode
A
The machine must be switched off
and the drum door closed. The
programme selector must point to
"Finish".
B
Press the additional option buttons
"Soak" and "Pre-wash" at the same
time and hold pressed in and:. . .
C
. . . switch the machine on with the "I-
ON/0-OFF"-button.
D
Release all these buttons.
P 0
appears in the "time" display.
2. Selecting a programmable function
E
For the programmable function re-
quired turn the programme selector
to the setting given:
– for
P1
High Water level
to - MIXED WASH Poly/Cottons -
– for
P2
Water plus system
to - Separate rinse -
– for
P4
activate
i
compartment
to - Spin -
– for
P9
Gentle action
to - WOOLLENS 40°C -
– for
P10
Activate top-up rinse for
COTTONS wash
to - DELICATES cold -
– for
P11
Memory Function
to - DELICATES 30°C -
F
In the Display the
P
now flashes al-
ternating with the number of the pro-
grammable function
e.g.
P...1...P...1
The following also appears on the right:
0
= Programmable function is
not active
1
=
Programmable function
is active
with
P 2
, a
2
appears on the right = Op-
tion 2 is active.
Programmable functions
35