Washing environmentally and economically
25
EcoFeedback
You can view information about the en-
ergy and water consumption of your
washing machine with the
sensor.
The following information will appear in
the display:
– An estimate of the energy and water
consumption before the programme
begins.
– The actual energy and water con-
sumption and the cost during the
programme or at the end of the pro-
gramme.
1. Estimate
After selecting a programme, touch
the
sensor.
The estimated energy and water con-
sumption levels will be displayed as a
bar chart.
OK
The more bars visible (
), the higher the
energy or water consumption.
The estimate will vary depending on the
wash programme, temperature and any
options selected.
Touch the
OK
sensor or wait until the
display automatically returns to the
standard display.
2. Actual consumption
You can view the actual amount of en-
ergy and water used by a programme
both during and at the end of the pro-
gramme.
Touch the
sensor.
OK
Energy
< 0.1 kWh
Use the
sensors to change to the
estimated water consumption levels.
The consumption will alter as the pro-
gramme progresses.
If the door is opened or the machine
has switched off automatically at the
end of the programme, the data will
revert to the estimated consumption.
Tip:
You can view the consumption
data for the last wash programme in
Settings
under
Consumption
.
Summary of Contents for WCI 660 WCS
Page 104: ......
Page 105: ......
Page 106: ......
Page 108: ...M Nr 10 843 340 01 en GB WCI 660 ...
