Programme sequence
53
= low water level
= medium water level
= high water level
= intensive rhythm
= normal rhythm
= sensitive rhythm
= handwash rhythm
= carried out
–
= not carried out
This washing machine has fully elec-
tronic controls with automatic load con-
trol. The washing machine takes in the
right amount of water required for the
programme depending on the amount
of laundry and its absorbency rate.
The programme sequences outlined in
the chart are based on the basic pro-
gramme with a full load.
The washing machine programme se-
quence display shows which stage of
the programme has been reached.
Special features in the pro-
gramme sequence
Anti-crease:
at the end of the programme the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: There is no anti-crease
phase in the
Woollens
and
Silks
programmes.
The door can be opened at any time
during the anti-crease phase.
1)
If a temperature of 60 °C or higher is
selected, and with
and
,
two rinses are carried out. If a tem-
perature of less than 60 °C is selec-
ted, three rinses are carried out.
2)
An additional rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected.
3)
An additional rinse is carried out if:
–
Water +
has been selected and the
options
Extra rinse
or
Extra water +
rinse
have been activated in the
Set-
tings
menu.
5)
An additional rinse is carried out if:
the
Water +
option is selected.
Summary of Contents for WCI 660 WCS
Page 104: ......
Page 105: ......
Page 106: ......
Page 108: ...M Nr 10 843 340 01 en GB WCI 660 ...
