Settings
104
Network
Miele@home
Control the networking of your
washing machine with your Wi-Fi
network.
The following points may appear in the
sub-menu:
Set up
This message only appears if the
washing machine has not yet been
connected to a Wi-Fi network.
Please refer to “Initial commissioning”
for instructions on how to set up the
connection.
Activate
(visible if Miele@home is deactivated)
The Wi-Fi function is reactivated.
Deactivate
(visible if Miele@home is activated)
Miele@home remains set up; the Wi-Fi
function is turned off.
Connection status
(visible if Miele@home is activated)
The following values are displayed:
- the quality of Wi-Fi reception
- the network name
- the IP address
Set up again
(visible if set up)
Resets the Wi-Fi login (network) to
immediately re-establish a new
connection.
Reset
(visible if set up)
- The Wi-Fi is switched off.
- The Wi-Fi connection will be reset to
the factory default setting.
The network configuration should be
reset whenever a washing machine is
being disposed of or sold, or if a used
washing machine is being put into
operation. This is the only way to
ensure that all personal data has been
removed and the previous owner will no
longer be able to access the washing
machine.
A new connection setup has to be
carried out in order to use the
Miele@home setting again.
