background image

Operating the washing machine

13

Main menu

After switching on the washing
machine, the main menu will appear on
the display.

You can access all the important sub-
menus from the main menu.

Touch the 

 sensor button at any time

to return to the main menu. Values set
previously are not saved.

11:02

Programs

Favourites

MobileStart

Help

Main menu page 1

You can scroll to the second page of
the main menu by swiping your finger
across the display.

11:02

Wash

Assistant

Maintenance

Settings

Help

Main menu page 2

The 

 symbol next to the time of day is

displayed when the washing machine is
connected to a network.

 Programs

You can select the various wash
programs.

 Favourites

You can save up to 12 of your own
customized wash programs (see
“Favourites”).

 MobileStart

MobileStart

 enables you to operate your

washing machine remotely with the
Miele app.

The 

Remote Control

 setting must be

switched on.

Touch the 

MobileStart

 sensor button and

follow the instructions in the display.

 Wash Assistant

The 

Wash Assistant

 provides a step-by-

step guide to selecting the optimum
wash program for your laundry (see
“Washing assistant”).

 Maintenance

Maintenance options for the TwinDos
system and the 

Clean Machine

 program

are located in the 

Maintenance

 menu

(see “Cleaning and care”).

 Settings

You can alter the washing machine’s
electronics to suit changing
requirements in the 

Settings

 menu (see

“Settings”).

Summary of Contents for WXR 860





















































































































Reviews: