Frequently Asked Questions
Fault message after the end of the program
Problem
Possible cause and solution
Check dosage
Excessive foam has built up during washing.
Check the amount of detergent dispensed.
With automatic detergent dispensing, check the
dispensing quantity set.
Observe the instructions on the detergent
packaging and the level of soiling on the laundry.
If necessary, reduce the dispensing quantity by
increments of 10%.
Hygiene info: select
“Maintenance” and
run the “Clean
Machine” program
A wash program using a temperature above 60°C has
not been run for a long period of time.
In order to prevent bacteria and unpleasant odours
building up in the washing machine, run the
Clean
Machine
program using the Miele Machine Cleaner
or a universal powder detergent.
The messages will appear at the end of the program and when the washing
machine is switched on, and need to be confirmed with the
OK
sensor button.
71
