background image

BW-136ACE and BW-136ACHT

Removable Door

Right

Side

Left

Side

Literature Tray with
key tabs for 3 sets of 
keys located on the 
inside of the door

Easily mount the removable back 
panel on the 1” standoffs welded 
into the back of the enclosure

BW-136ACE and BW-136ACHT with
AC unit or AC & Heater unit attached 
on the left-hand side

Holes for mounting the 
AC unit or AC/Heater 
unit are pre-cut on the 
left side

Ground Lug

22” x 34” sits on 6 standoffs

Rain-Channel and bulb-seal gasket for a

tight fit with the door when the two 1/4-

turn latches are closed

Two 1/4-Turn 
Latches, and
one Tubular Lock 
with a set of two 
keys

Dimensions and Weight

Outside dimensions 

• 

without

 AC attached:    

24.8”W x 38.5”H x 12.8”D
Outside dimensions 

• 

with

 AC unit attached are: 

32.75”W x 38.5”H x 12.8”D
Inside dimensions are: 23.9”W x 35.9”H x 11.9”D

• 

Internal back panel dimensions: 22”x34”

• 

Enclosure with back panel weighs 70 lbs

• 

AC unit weighs 60 lbs

• 

Shipping skid weighs 45 lbs

• 

External 0.580” mounting hole dimensions are:  
20” center-to-center from left to right and 
37 3/8” center-to-center from top to bottom

Removable Back Panel

AC

Unit

PR

OU

DLY

 MADE IN THE

 US

A

FO

R OV

ER 25 YEA

RS

!

800-473-0213  |  info@mierproducts.com  |  www.mierproducts.com

Mounting options

Wall-Mount

• 

Free-Standing

• 

using  angle  iron                                             
and a concrete                                
slab (pictured)

Pole-Mount                                     

• 

using angle iron

Summary of Contents for ACHT Series






Reviews: