The DA-066MP Wireless Chime Transmitter is designed to be both backward and forward compatible: it will
activate
any
wireless chime Mier Products has sold in the past, as well as any future models.
• This DA-066MP and a DA-078 Wireless Plug-in Chime are standard on the DA-605P Drive-Alert System
• This DA-066MP and a DA-080 Wireless Portable Chime are standard on the DA-605B Drive-Alert System
• The DA-066MP, DA-078 and DA-080 can also be added as accessories to the DA-500 or DA-600 Drive-
Alert Systems.
The internal codes are pre-set for the chimes and push-button transmitter. Do not change these codes.
T
he
DA-066MP
As
sTAnDArD
equiPMenT
on
The
DA-605P
or
DA-605B D
rive
-A
lerT
:
This
DA-066MP Chime Transmitter
is mounted on top of the Control Panel. When a vehicle is detected, the
DA-605 control panel activates the DA-066MP to send a signal to
DA-078 chimes
and/or
DA-080 chimes up
to 100+ feet away! (please see the next page for DA-078 and DA-080 chime installation)
.
i
nsTAlling
A
DA-066MP
onTo
A
DA-500
or
DA-600 C
onTrol
P
Anel
:
The DA-066MP as optional equipment on the DA-500 or DA-600 Drive-Alerts:
The DA-500 and DA-600 models come equipped with an electronic whistle in the control panel which serves
as the alert when a vehicle is detected. Often, customers later decide they would rather have a more pleasant
sounding chime than the supplied whistle, and would like to have alerts in multiple rooms or a portable alert.
This can easily and quickly be accomplished by adding this
DA-066MP
Wireless Chime Transmitter to the
contacts on these Drive-Alert models, to work in conjunction with
DA-078
and
DA-080
Wireless Chimes.
When adding a DA-066MP to a DA-500 or DA-600, the DA-066MP must be mounted on the outside of
the Drive-Alert Control Panel. Note: the control panel may have to be moved to find the best location to
communicate with the wireless chimes.
Connect The
RED
wire to “
+24 VDC
” terminal, then the BLACK wire to “
NEG
” or “
GND
” terminal, then a
“
JUMPER
” from that same “
NEG
” or “
GND
” to the “
C
” terminal, and finally the WHITE wire to the “
NO
”
terminal. (see illustrations below)
800-473-0213 | info@mierproducts.com | www.mierproducts.com
DA-066MP Chime Transmitter and DA-078 & DA-080 Wireless Chimes
The DA-066MP
Remote Chime
Transmitter
shown mounted on top of a
DA-605
The DA-066MP
Remote Chime
Transmitter
shown as an accessory
NOTE:
On the DA-500 Control Panel the Whistle Switch must be OFF
.
If it is ON, the 1 amp fuse inside
the control panel will be blown
.
If you wish to use both the DA-066MP AND the Whistle, then a
DA-500LKA Accessory Set of Contacts must be added to the control panel.
DA-500
DA-500 with WHISTLE OFF
RED BLACK SHLD NEG +24DC NO NC C
UN REG
DA-066MP Push-Button
Wireless Chime Transmitter
Jumper
DA-600
DA-600 with WHISTLE ON or OFF
SIG ALA +5VDC GND
+24DC
NO NC C NO C
UN REG
DA-066MP Push-Button
Wireless Chime Transmitter
Jumper
MP0108026
