10
Note About Switchable Retractors
A note about switchable retractors:
Many vehicles have a lap and shoulder belt
system in which the retractor can be switched
from the emergency locking mode (ELR) to an
automatic locking mode (ALR).
The ALR mode is
not designed for use with booster car seats
and mifold One is not recommended for use with
a lap and shoulder belt in the ALR mode.
Note:
Should the lap and shoulder belt
inadvertently be switched into the automatic
locking retractor mode (ALR) and the vehicle
seat belt is locked, follow the steps below to
remove the lap belt.
1.
Pull out and hold the shoulder belt to prevent
further retraction. Be aware not to allow
shoulder belt webbing to retract during this
entire procedure.
2.
Have your child lean away from the
vehicle buckle.
3.
Lift mifold One up on the buckle side and
remove lap belt.
If the lap and shoulder belt is inadvertently
switched into the locking mode, see steps on
page 17 to remove child.
Summary of Contents for Grab-and-Go Booster MF06-US
Page 25: ...24 Memo...
