4
BA_Lötstar_EN_Vers.07.2016
© MIG·O·MAT GmbH
1
General
The present Operating Instructions are part of the delivered
equipment. They must be ready for use at any time and remain
with the unit in case of resale.
We reserve the right to carry out technical modifications on the
unit due to advanced development.
An operating manual cannot take account of every conceivable
use. Contact your dealer or the manufacturer for further
information or in the event of problems which are not covered or
not sufficiently covered in this operating manual
2
Important safety warnings
Carefully read and observe before putting into operation!
The present unit operates with acid, flammable and –
depending on the type of vaporizer liquid – toxic substances.
Therefore, a predetermined operating sequence and strict
observance of the safety and protection measures described
below are prerequisite.
The present operating instructions cannot take each and every
specific regulation into consideration which might apply in
various countries. The operator of the unit must ensure that all
relevant local regulations concerning the prevention of
accidents and the use of hazardous substances are known and
observed.
MIG-O-MAT Lötstar soldering and welding units are
intended for soldering, welding and melting of metals.
Operation is allowed by industrial and commercial
businesses only.
The unit must be operated by specialized, trained staff only.
The operating instructions must be strictly observed. The unit
must not be operated by unauthorized persons or by children.
For reasons of safety, the unit must be connected to a
shockproof socket only. The technical data indicated on the
nameplate must correspond with the available local connection
conditions, particularly with regard to mains voltage and current
consumption values.
For maintenance and service works, in case of liquid inside the
unit and malfunctions, and when you have finished working with
the unit pull the main plug. In case of a malfunctioning please
contact your supplier or the manufacturer.
The unit must be opened by authorized and specialized staff
only!
Instructions for the
operator
Intended use
Operating staff
Mains connection
Risks due to electric
current