Putting out of operation and waste disposal
© MIG·O·MAT GmbH
BA_Lötstar_EN_Vers. 07.2016
51
9
Putting out of operation and waste disposal
9.1
Waste disposal of Lötstar unit
After removal of the operating substances (
see sections 8.7 and
8.8.
) the components of the Lötstar can be taken to electronics
and metal recycling stations. You can also return the
components to the manufacturer for disposal.
9.2
Waste disposal of electrolyte
When handling electrolyte always read and observe the
safety warnings given in section 8.1. (e.g. wear protective
goggles and gloves)!
After neutralization*, both electrolyte and electrolyte solution
can be disposed of into the sewerage system in compliance
with the regulations of the local authorities, or they can be
disposed of through specialized waste disposal companies.
Waste number 20 01 15*, „Alkalines“.
Containers can also be returned free of charge when they are
completely empty. Rinse the containers with water before you
return them for waste disposal.
*Neutralization with acid, e.g. acetic acid: For this pour the
acetic acid into a suitable tank first, then add the electrolyte
step by step.
Caution!
The liquid can heat up considerably
.
9.3
Waste disposal of vaporizer liquid
When handling vapourizer liquid / flux always read and
observe the safety warnings given in section 8.1.!
Recommendation: 1. disposal by specialized waste disposal
companies: waste number: 14 06 03*; „Other solvents and
solvent mixtures“. 2. burning in suitable combustion facility in
compliance with the regulations of the local authorities.
Do not let escape into the sewerage system / surface water /
groundwater. Do not let escape into the soil. Do not let escape
into the environment uncontrolled.
Containers can also be returned free of charge when they are
completely empty.
WARNING!
WARNING!
