Decommissioning
Version 4.2.4 - 09/2017
Operating Manual Sintering Oven HT-2/M/Zirkon-120
Page 47
Decommissioning
Decommissioning can be carried out for two reasons:
y
For the purpose of reinstalling the unit at another location.
y
For the purpose of final disposal.
If the
sintering oven
is to be reinstalled at another location, decommission-
ing must be well prepared. All components and fittings must be carefully
removed, labelled and, if necessary, packaged for transport. This ensures
that all parts can be identified correctly and refitted in the correct positions
when reassembling the unit.
1.
Switch the
sintering oven
off.
2.
Disconnect the
sintering oven
from the voltage supply.
3.
Remove all connections (e.g. PC interface cable, etc.) from the
sin-
tering oven
.
Disposal
Safety
Warning
Release of pollutants!
Pollutants can be inhaled when the insulating materials are handled.
h
Wear personal protective equipment (respiratory protection) during
disposal.
Warning
Potential contamination of the environment and groundwater due to
improper disposal!
h
The regulations and guidelines of the legislature in the country of op-
eration must be complied with when disposing of parts of the unit and
operating materials.
Disposal
1.
Sort the component parts of the
sintering oven
into recyclable mate-
rials, hazardous substances and operating materials.
2.
Dispose of the component parts of the
sintering oven
or take them
to be recycled.
Summary of Contents for HT-2/M/Zirkon-120
Page 48: ......
