Mikasa MT-76D, Instruction Manual

Transportation and storage precautions

DANGER

！

When transporting

Before transporting the machine, stop the engine.

DO NOT

 try to move it before the engine and machine body have cooled down enough.

Drain any fuel before transporting the machine.

Secure the machine body so that the machine cannot move or fall during transportation.

When you want to lift the machine by gripping the handle, be careful not to pinch your 

fingers or hands between the handle and the main body.

Since this machine is quite heavy, use a truck specifically designed to transport heavy 

objects.

When storing the machine

After the engine and machine body have cooled down enough, store the rammer so that it is 

level. Fasten the machine as needed so that the machine cannot fall down. If it you must lay 

the machine down, close the fuel tank cap and oil fill plug securely. Arrange the machine 

position so that the muffler will be facing down. After it is lying down, make sure there are 

no oil or fuel leaks. (If fuel is leaking, drain it all from the fuel tank.)

Appropriate maintenance of the machine is required to ensure safety and keep the machine 

performing well. Always be aware of the machine's condition and keep it in good condition.

After performing any maintenance, check the condition of the safety components and the 

general safety of the machine. In particular, check the nuts and bolts thoroughly.

If you have to disassemble any components on the machine, be sure to refer the 

maintenance standard sheets and always work safely.

■

■

■

■

■

■

■

■

■

■

■

■

■

■

Maintenance precautions 

WARNING

！

CAUTION

！

Be sure to turn the engine off before 

checking or adjusting the machine.

The muffler and muffler guard 

become very hot. Do not touch them 

until they will have cooled down.

The lubrication oil and engine oil are 

very hot and can burn you. Do not 

s t a r t   a n y   m a i n t e n a n c e   o n   t h e  

machine while the oil remains hot.

5

Transport the rammer in a manner that keeps it level. If you must lay the machine down to 

transport it, drain any fuel from the fuel tank. Then close the fuel tank cap and oil fill plug 

securely. Next, position the machine so that the muffler will be facing down.