1.
2.
3.
4.
5.
6.
1.
2.
3.
With four bolts (21) removed, take off the
outer belt cover (20).
Remove V-belt(16).
With bolt(15) removed, withdraw the clutch
(12).
With flat head screw(18) removed, take off
dust cover(17). (Base can be separated
from vibrating plate even without perform-
ing the steps 3 and 4.)
Remove hydraulic hose which has been
connected to vibrator.
Before removing the hydraulic
hose, remove mud or any other
smear from the joint area.
After removing four bolts which have been fixing isolation rubber to the base(1), lift the base assembly
upward. The vibrating plate assembly will be separated.
Coat the bolts and nuts for mounting the shock adsorber with Loctite 242.
All the mounting bolts for the basic machine should be coated with Loctite 242.
Installation of the clutch should be made with the belt groove coming to the engine side.
Reassembly
Reassembly should be
conducted with the disassemby procedure reversed, while observing below:
5-2
BASIC MACHINE <Common to MVH-R60, 100 (120) and 150>
＊
MVH-R60 is used as an example here.
Disassembly
37
38
36
35
25
24
39
3
4
5
2
23
50
52
51
6
11
12
14
15
13
7
8
47
48
28
29
28
29
26
30
33
27
45
44
46
4441
43
42
4441
43
1
19
18
17
20
21
16
31
R60 main body corollary exploded
8
