Section 2
Introduction
17
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
(OFF]
The nstrument wll contnue to operate n
run mode even when an event condton s
trggered.
(On]
The nstrument wll enter freeze mode as
soon as an event condton s trggered..
[ALARM MSG]
Dsplays a warnng message when an
event condton occurs.
(OFF]
No alarm message wll appear when the
event condton s trggered.
(On]
An alarm message of [OVER] or
[UNDER] wll appear on the dsplay when
the event condton s trggered.
[ALARM SOund]
Sounds an audble warnng when an event
condton occurs.
(OFF]
There wll be no audble sound when the
event condton s trggered.
(On]
An audble beep wll be heard when the
event condton s trggered.
[InteRVAL]
Specifies the time interval to be used for
automatcally savng the thermal mage to
the memory card..
(5 tO ~3600
SeCOndS
The time interval can be specified by one-
second steps beginning at five seconds.
[eVent]
Occurs as the result of a condton based
on the specified threshold temperature
wthn the thermal mage.
[tHReSHOLd
VALue]
This value is the specified temperature for
generating an event condition, and can be
specified within the specified temperature
range.
[undeR]
As the temperature decreases below the
threshold value, the event occurs. (This
determnes an event condton based on
the maxmum or mnmum temperature
on a thermal image, unless the threshold
value is specified otherwise. When a
BOX
setup is set, it judges using the maximum
or mnmum temperature of the box wthn
the lmts).
Summary of Contents for 7600PRO
Page 2: ......