Section 2
Introduction
19
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
f)
[RAnGe]
The MkroScan 7600PRO provdes a total
of two temperature ranges. These two
ranges provde an overall temperature
span of -40°C to 500°C (-40°F to 932°F).
[1]
Range 1: -40°C to 120°C (-40°F to
248°F).
[2]
Range 2: 0°C to 500°C (32°F to 932°F).
g)
[AVeRAGe]
The S/N Improvement function aids in
reducing the noise included in the image
signals by means of averaging the image.
See Section 4.9 for more information on
this function.
h)
[GAIn COntROL]
The Gain Control Feature is used for
performng automatc temperature or auto-
matc senstvty tracng. See
Secton 4.10 for more nformaton on the
Gain Control feature.
[OFF]
Disables the Gain Control Feature.
[LVt]
When LVT is active, the cross cursor
traces a pont temperature sgnal and
always controls for the temperature sgnal
level to be at the center level of the color
bar. When the cross cursor is not used, the
temperature signal at the center (X=160,
Y=120) of the thermal mage s traced.
Whle level trace s actve the LVT s
dsplayed n the upper-rght corner of the
screen.
[AGC]
When AGC is active, it traces the tempera
-
ture sgnal of the entre thermal mage and
always controls the dsplay senstvty and
temperature level to be at ther optmal
values. By combnng use of ths mode
and the LEVEL/SENS gan mode of the
range mode, the temperature signal can be
traced beyond the range. When the auto
gain control is active, AGC is displayed in
the upper-rght corner of the screen.
2)
[DISPLAY MENU]
Allows you to establsh certan dsplay
optons.
a)
[VISIbLe IMAGe]
Allows you to dsplay a vsble mage.
b)
[COMPOSIte
IMAGe dISPLAy]
Creates a thermal/visual composite image.
Summary of Contents for 7600PRO
Page 2: ......
