background image

Section 9

Appendix

291

MikroScan 7600PRO

   Operator’s Manual

Catalog 11180-94

V15.4F 050406

9.5  MikroScan 7600PRO Specifications

MikroScan 7600PRO  Rev 121905

Mikron reserves the right to change specifications to reflect the latest changes in technology and improvements at any time without notice. These changes will be 

reflected in subsequent editions of our literature when warranted.

  

FireWire is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

MikroScan 7600 PRO

Performance

Temperature Range:

Range 1: -40°C  to 120°C

Range 2:  0°C  to 500°C 

Range 3:  200°C  to 2000°C  (Optional) 

Measurement Accuracy:

±2% or 2°C of reading

Field of View:

21.7°(H) x 16.4°(V)

Focus Range:

30 cm to infinity

Instantaneous FOV / Spatial Resolution:

1.2 mrad

Image Update Rate:

60 frames per second

Resolution:

0.06°C (at 30°C 60Hz) or 0.03°C (at 30°C Σ

12)

Detector:

320 x 240 Uncooled Focal Plane Array Microbolometer

Spectral Band:

8.0 to 14.0 µm

Display Functions

B&W/Color Image:

Several palettes available

Thermal/Visual Composite Image Display: Provided

Isothermal Band Display:

Max. 4 bands

Multi-image display:

Replay 12 thermal images

Multi-Sense Display:

Provided

Line Profile:

X, Y line profile (waveform display)

Presentation

A/D Resolution

14 bit

Annotation:

Text and voice annotation (30 sec. per image)

Movie Recording:

Real-time memory (1664 images @ 60Hz)

Image Processing Functions:

Variable level/sense; Multi-point temperature display (10 pts); Multi-point 

emissivity display (10 pts); 

T Display; Max/Min (peak hold) temperature 

display; Alarm (full screen or specified box); 2x and 4x digital zoom (Run/

Freeze); Box setting (max 5 boxes) 

Display:

Viewfinder and 3.5 inch LCD monitor with auto switch

Video Output:

NTSC/PAL composite video signal, S-Video

Image Zoom:

2:1, 4:1 (with spatial filtering)

Visual Camera

Pixels:

0.41 Mega pixels

Effective Image Pixels:

752 (H) x 480 (V) pixels

Field of View:

30.1° (H) x 22.7°(V)

Sensitivity:

1 lux

Focusing distance:

30 cm to infinity

Auto Exposure:

Provided

Video Signal:

NTSC

Measurement

Measuring Functions:

Run/Freeze

S/N improvement:

Σ

2, 

Σ

8, 

Σ

16, and spatial filter ON/OFF

Alarm:

Screen display and alarm sound (ON/OFF)

Interval Measurement:

Recording on memory card: 2 to 3600 sec. interval; trigger function

Emissivity Correction:

0.10 to 1.00 (at 0.01 steps)

Environmental Temperature Correction:

Provided (including interval NUC)

Background Compensation:

Provided

User Setup:

Pre-registration of user setup (max. 10 setups)

Auto Functions:

Full automatic (level, sense, focus); level trace, auto gain control

Interface

Communication:

RS-232/C  

Storage Device:

Compact Flash Memory Card (stores thermal images in .SIT or .BMP 

file format; visible images in .SIT or .JPEG file format; and thermal/visual 

composite images in .BMP file format)

Video Signal Output:

NTSC/PAL composite video signal, S-video

Remote Control Operation:

IEEE1394 (Firewire®) Interface

Environmental

Operating Temperature:

-15°C to 50°C  90% Relative Humidity or less (not condensed)

Storage Temperature:

-40°C to 70°C  90% Relative Humidity or less (not condensed)

Environmental Protection:

IP 54 (IEC60529)

Shock:

30G (IEC60068-2-27)

Vibration:

3G (IEC60068-2-6)

Electrical

Power Supply:

AC adaptor: 100V to 240V, DC 7.2V (nominal)

Power Consumption:

Approx. 6W (typical)

Battery Operation:

Approx. 2 hours 30 minutes

Physical Characteristics:

Camera Dimensions:

4.3” x 4.5”  x 7.4” (excluding projection)

Camera Weight:

2.9 lb (excluding battery and LCD)

3.5 lb. (including battery and LCD)

Summary of Contents for 7600PRO






















































































































































































































































































































Reviews: