Section 2
Introduction
27
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
[bAtteRy]
Allows you to choose whether or not
to display the battery power indication
symbol.
[On]
This option enables the display of the bat-
tery power indication symbol (default).
[OFF]
This option disables the display of the bat-
tery power indication symbol.
[tV SySteM]
This option is used to select the desired
composite video output mode.
[ntSC]
Used to select the 60-Hz American Stan-
dard (NTSC) video output option.
[PAL]
Used to select the 50-Hz European Stan-
dard (PAL) video output option.
[tV SCAn]
This option is used to select the desired
TV Scan format
[nOn-
InteRLACe]
Used to select the non-interlace option.
[InteRLACe]
Used to select the interlace option.
[LCd bRIGHt]
Sets the brightness level of the LCD
display.
e)
[RS232C)
Performs RS-232C communications set-
tings for the camera.
[RS-232C
bAud RAte]
Utilized in conjunction with the
RS-232C interface.
[RS-232C
FORMAt]
Used to select the 50-Hz European Stan-
dard (PAL) video output option.
f)
[SVCOnFIG]
Saves environmental settings.
g)
[LdCOnFIG]
Loads Saved environmental settings.
h)
[FIt COMPOSIte
IMAGe]
Adjust the position of the thermal to the
visible image when a composite image is
displayed.
i)
[AutO StAndby]
Allows you to set the camera to automati-
cally enter standby mode based on a pre-
established time interval.
j)
[StAndby nOW]
Allows you place the camera in standby
mode.
k)
[VeRSIOn)
Displays information pertaining to the
camera’s firmware version.
Summary of Contents for 7600PRO
Page 2: ......
