Section 3
Getting Started
39
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
3.8 Selecting a Lens Option
The MkroScan 7600PRO supports a lens wth a 30.1°(H) x
22.7°(V) FOV, which is provided as a standard feature. It also sup
-
ports additional lenses, which are available at the time of purchase.
When a
lens is changed, the instrument must be matched to the new
lens characterstcs. The
lens option is changed as follows:
1) Verify the camera is operating in
[Run]
mode.
2) Go to
[MENU]
→
[CAL]
→
[LENS]
.
Classic View Menu
[LenS HIGHLIGHted]
[LenS HIGHLIGHted]
Standard View Menu
3) Press the
jOyStICK [e]
button to select the
LENS
option.
[LenS OPtIOn SeLeCted]
A bar wll appear at the bottom of the screen showng the
current
lens option:
4) Toggle the
jOyStICK
up or down if needed until the desired option
has been selected.
NOTE:
Refer to your lens docu-
mentation for selecting the
appropriate lens option.
NOTE:
Refer to your lens docu-
mentation for selecting the
appropriate lens option.
Summary of Contents for 7600PRO
Page 2: ......
