EN - English - Quick Guide:
This is Wireless Network Device. You can find the product model name on the case label (ID).
Please visit the user manual page on
for the full up to date user manual. Or scan the QR code with your mobile phone.
Technical specifications, brochures and more info about products at
Configuration manual for software in your language with additional information can be found at
https://mikrotik.com/consultants
Depending on the antenna used, you must set its gain. This is to ensure that EIRP meets the limit set by the local authorities. This is done in the
Webfig Quickset menu.
This Device accepts input of 24V DC power adapter, which is provided in the original packaging of this device.
First steps:
Connect your external antenna to the SMA connector. Connect your ISP cable to the device. Connect the device to the power source with the provided
adapter.
Open network connections on your PC and search for MikroTik wireless network and connect to it.
Once connected to the wireless network, open
in your web browser to start configuration, user name: admin and there is no password by
default.
Update the device to the latest software version by clicking check for updates button.
Depending on the antenna used, you must set its gain in the Quickset menu. This is to ensure that EIRP meets the limit set by the local authorities.
Choose your country and set up your router password in the bottom field to the right.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing
accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the
Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the
correc
.
t hardware and configuration or to follow the correct procedures could result in a hazardous situation to people and damage to the system
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own
risk!
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate
measures.
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.
This MikroTik equipment complies with the FCC, IC and European Union radiation exposure limits set forth for an
Exposure to Radio Frequency Radiation:
uncontrolled environment. This MikroTik device should be installed and operated no closer than 375 centimeters from your body, occupational user or the general
public.
Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.
BG - Български. Бързо ръководство:
Това е устройство за безжична мрежа. Можете да намерите името на модела на продукта на етикета на регистъра (ID).
Моля, посетете страницата с ръководството за потребителя на
за пълното актуализирано ръководство за употреба.
Или сканирайте QR кода с мобилния си телефон.
Технически спецификации, брошури и повече информация за продуктите на
Ръководство за конфигуриране на софтуер на вашия език с допълнителна информация можете да намерите на
Устройствата MikroTik са за професионална употреба. Ако нямате квалификация, моля, потърсете консултант
В зависимост от използваната антена, трябва да зададете нейното усилване. Това е за да се гарантира, че EIRP отговаря на ограничението,
определено от местните власти. Това се прави в менюто за бърз набор Webfig.
Това устройство приема вход на 24V DC адаптер за захранване, който се предлага в оригиналната опаковка на това устройство.
Първи стъпки:
Свържете външната си антена към SMA конектора. Свържете вашия ISP кабел към устройството. Свържете устройството към източника на
This device needs to be upgraded to RouterOS v6.46 or the latest version to ensure compliance with local authority regulations!
It is the end users responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be professionally installed
Това устройство трябва да бъде надстроено до RouterOS v6.46 или най-новата версия, за да се гарантира спазването на местните
регулаторни разпоредби.
Крайните потребители са отговорни за спазването на местните разпоредби, включително работата в рамките на законни честотни канали,
извеждане на продукция изисквания за захранване, окабеляване и изисквания за динамичен избор на честота (DFS). Всички радиоустройства
на MikroTik трябва да бъдат професионално инсталиран.
