Operating Manual Loggicar
–
C v4.3
Installation notes.
The measurement element of the sensors should be installed in the cargo section of
the vehicle in such a way as to limit the unwanted effects of the external factors on
the accuracy of the measurement. In case of a one sensor layout, install the sensor
in the 2/3 of the length of the cargo section, from the driver
’s cab. In the case of a
two sensor layout, install the sensors in the 1/3 and 2/3 of the cargo section.
Suggested mounting height form the floor: 1.5 m.
Allow at least 50 cm distance from the internal light source.
11. Adding (logging in) sensors Loggicar C
In case only one temperature or temperature and humidity sensor is connected
to the device, the logger automatically adds the sensor to the list.
In case more sensors are connected to the logger, add sensors manually by
following the procedure and drawings below.
Selection:
Press
.
Use the
buttons to select the SENSOR menu.
14
