Operating Manual Loggicar
–
C v4.3
1. Introduction.
LOGGICAR-C was designed for the purposes of monitoring parameters, such as
temperature and humidity of products transported in refrigerated trucks
–
according to the
Commission Regulation (EC) No. 37/2005.
Reading this manual will increase your satisfaction with the reliable operation, low
cost and safe use of the product
.
2. Operation description.
The logger has 4 measurement channels to connect temperature or temperature
and humidity sensors and 4 digital channels to connect door opening sensors. The
device provides full control over the refrigerated truck.
The logger is equipped with a report printer in order to print out a delivery report
for the customer or control authorities.
The memory of the logger (non-volatile) enables storing ca. 32000 measurements.
When the memory is full, older results are deleted to make space for newer ones
(overwriting).
The contents of the memory can be downloaded and archived using the Loggisoft LC
software (optional).
Breakdown of memory capacity depending on logging frequency is included in par.
3 TECHNICAL SPECIFICATIONS below.
The built-in OLED screen provides for easy operation and local display
of measurements.
The software of the logger enables setting alert thresholds (lower/upper threshold)
–
if these values are exceeded, the display will blink and the event will be shown on
the printed report.
Printing paper is the only operational cost generated by the logger.
2
