Standby
Press and hold the power
button for 3 seconds until
the light belt is on, the
machine enters the standby
Shut Down
Press and hold the power
status.
button for 3 seconds to
shutdown normally, or
press and hold the power
button for 15 seconds to
Cleaning on
forced shutdown.
specific point
Press and hold the
function button for 3
seconds to enter
cleaning on specific
point mode in-situ.
Automatic Cleaning
When the machine is in standby
state, press the power button
once and the machine will start
Forced Power Cut
Stab the reset hole for
to clean automatically.
Automatic Charging
When the machine is in
3 seconds to cut power.
standby status, press the
function button once to
enter charging mode.
Tips:
The product is self-routed during its work . If it is moved manually, the machine will reset
route and re-clean the cleaned area. To ensure work Efficiency, please do not move the
machine.
This product may have a short stay during work, trying to traversing uncovered area or to
reset route. Please wait patiently. How often it stops or how long it stays depends on
complexity of actual home environment.
4.2 Charging
4.2.1Charging Manually
1. Charging by using the wash base:
Connect the power cable to the wash
base firstly, and place the machine on
the wash base for charging (the light is
orange during charging).
Notes:
1. If the machine stops working and stay away from the wash base for more than 10
minutes, it will automatically enter sleep mode.
2. When the baery is lower than 5%, the machine will automatically shut down.
2.Charging by using APP
Firstly connect the machine to the app,
then tap "back to charge" button.
The machine will automatically find the
wash base for charging within valid range.
iMap Venii Max
