46
4-4-4-1.Aggregator Setting
1.
Group:
Displays the trunk group ID.
NOTE:
Before setting LACP support, you must first set the trunk group
using the
Port / Trunk Configuration
screen.
2.
LACP:
Press the
Space
key to enable or disable LACP (Link Aggregation
Control Protocol) support. If enabled, the group is an LACP static trunking
group. If disabled, the group is a local static trunking group.
3.
LACP Work Port Num:
The maximum number of ports that can be
aggregated at the same time. If the group is an LACP static trunking
group, the exceed ports is standby and able to aggregate if the work ports
fail. If the group is a local static trunking group, the number must be the
same as group ports.
Actions->
<Edit>:
Configures all items. When finished, pressing
ESC
returns to the
action menu line.
<Save>:
Saves all configured values.
<Quit>:
Exits this page and returns to previous menu.