background image

VI 

Battery Preservation 

Precaution 

Only use batteries designed for this computer. Using incompatible battery types may

cause explosion, leakage or damage to the computer.

Do  not  store  your  battery  in  high  moisture  condition,  low  temperature  or  high

temperature.  Proper  storage  temperature  is  5~20°C  and  capacity  is  suggested  to

remain 50%.

Do not put your computer and battery near any heat source(oven, stove…).

Do not remove the battery from the computer while the computer is powered on.

Do not continuously use a battery that has been dropped, or that appears damaged

(e.g. bent or twisted) in any way. Even if the computer is able to continuously work with

a damaged battery, the circuit damage may occur and possibly cause fire.

Always use the charger designed for this computer to recharge the battery. Incorrect

recharging may cause the battery to explode.

Do not try to service a battery by yourself. For battery service or replacement, please

contact your service representatives.

Please dispose of damaged battery promptly and carefully. Explosion or leakage may

occur, if the battery is exposed to fire, improperly handled or discarded.

If the battery will not be used for a long period, please charge the battery to 50% and

remove AC adapter. If the battery is stored in a system, it should be recharged to 50

every 3 months. If the battery is stored solely, it should be recharged every 6 months.

This could prevent the battery from being over discharge and damaged.

If your system always connects the AC power supply, the battery should be discharged

to 50% every two weeks.

Battery Capacity Decline 

The capacity of a Li-ion battery decreases over time due to it’s chemistry features. 

Normal Li-ion battery can be fully charged and discharged 300~500 cycles. A battery which 

is  properly  used  in  room  temperature  (25

)  can  be  charged  and  discharged  about  300 

times (or a year) before its capacity gradually decrease to 80%. 

The decrease rate of battery capacity depends on factors including system design, model 

number,  power  consumption,  software  program  and  system  power  management.  With 

extreme temperature or abusing the battery might lose 70% of its capacity in a relatively 

Summary of Contents for DT13























Reviews: