BATTERY INSTALLATION
Battery installation and unloading
• During the installation, please confirm that the power switch is at “OFF /O” position.
Battery release button must be at the top, align the contact point of the battery against the
"
corresponding contact point on the battery slot, slide the battery in, and gently press until
the battery is locked in place.
• When removing the battery from portable winch, confirm the power switch is in the “OFF/O” position.
"
Press down the battery release button and remove the battery.
Battery power
1.
When the battery is installed in the portable winch, the battery status can be examined by
removing the
battery frame in the display screen on the fuselage.
2.
There is a power display button and three LED power indicator lights on the top of the battery.
After pressing the button, the battery status will be displayed:
• Three LED lights are on and green, indicating a full battery.
• One LED light is off, the other two are green. If the indicator does not flicker, the power level is between
40% and 70%.
• If the indicator light is red, please charge as soon as possible.
2.5AH 25.2V DC
LITHIUM BATTERY
Battery Release Button
Power Display Button
LED Power Indicator Light
2121 Blount Road Pompano Beach, FL 33069 MileMarker.com 1.800.886.8647
PAGE 6
*
REMINDER: Turn off winch when finished.
If the battery is drained completely,
it may be nonchargeable,
voiding the
warranty on the battery.*