2121 Blount Road Pompano Beach, FL 33069 MileMarker.com 1.800.886.8647
PAGE 9
Power button
To start, press and hold ON/OFF button for 2-3 seconds. The red LED will rapidly flash indicating that the portable
winch is in operation.
To stop, press the ON/OFF button for 3 seconds. Or it will be stopped automatically in 3 minutes if there has been
no winching activity.
1.
2.
Press and hold ON/OFF button until finishing the step 2. (Ensure the portable winch is off)
Turn on the portable winch until the LED screen shows two arrow marks, now the reset learning function is
completed.
1.
2.
Remove the four screws from the back of wireless transmitter
.
Separate the cover and remove the old battery
.
Insert a new battery. Rejoin the cover ensuring alignment is correct and the four screws are tight.
1.
2.
3.
Wireless remote control
Batter
y
replacement
Resetting Learning function
If the transmitter needs to be replaced, carryout the following steps to match the new transmitter to the receiver.
Red LED
REMOTE CONTROL
Winch OUT
Winch IN