1
Table of Contents ------------------------------------------------------------ 1
Wiring
Important Notes ------------------------------------------------------------- 3
Installation ------------------------------------------------------------------- 4
Supporting the Unit -------------------------------------------------------- 5
Identification of Control Functions --------------------------------------- 6
Controls -------------------------------------------------------------------- 7-8
Radio Section Operation -------------------------------------------------- 9
USB Section Operation ----------------------------------------------- 10-11
Trouble Shooting Guide & Specifications ------------------------------ 12
Identification ------------------------------------------------------- 2
12
Table of Contents
Trouble Shooting Guide
INTERFERENCE ON RADIO
Poor atmospheric conditions - Try again later in the day.
Antenna / lead broken or damaged.
Power Output :
Power Supply :
Speaker Impedance:
4 x 45 watts
DC + 12V
Negative Ground
4 ohm
Tuning Range :
Sensitivity :
530~1710KHz (USA)
522~1620KHz (EUR)
35dB / uV
Tuning Range :
Sensitivity :
Separation :
87.5~107.9MHz(USA)
87.5~108MHz (EUR)
10dB / uV
30dB
FM TUNER
AUDIO AMP & GENERAL
DISTORTED AUDIO
Specifications
AM TUNER
Check loudspeaker wiring.
This product contains a biamp. It is important not to connect the front loudspeaker
ground to the rear speaker ground.
Check speaker wiring for proper polarity.
Faulty loudspeaker.
Distortion at highest volume levels may be normal, as amplifier has reached
maximum power output. Otherwise the power and ground wire's gauge might
be too small of a gauge. Use 10amp cable or more.
Reduce the bass effect or switch off the loudness mode.
Battery and or charging circuit may be faulty.
OTHER MALFUNCTIONS
Initiate the reset feature as described on page 10 of this user manual.
