14
Change Password
Change the password for ToolBox App or software to read/write this
device.
3.4 Advanced Settings
3.4.1 Data Storage
WTS series sensor supports storing more than 19,000 data records locally and exports data via
ToolBox App or ToolBox software. The device will record the data according to reporting interval
even not joining to network.
1. Go to “
Device Settings -> Basic
” of ToolBox software or “
Device -> Settings -> General
Settings
” of ToolBox App to enable data storage feature.
2. Go to “
Maintenance -> Basic
” of ToolBox software or “
Device -> Maintenance
” of ToolBox
App, click “
Export
”, then select the data time period and click “
Save
” to export data.
Note:
Toolbox App can only export last 7 days’ data. If you need to export more data, please use
ToolBox software.
3. Click “ Clear” to clear all stored data inside the devices.
3.4.2 Data Retransmission
WTS Series sensor supports data retransmission to ensure network sever can get all data even if
network is down for some times. There are two ways to get the lost data:
Network server sends downlink commands to enquire the historical data for specifying time
