2
Applicability
This guide is applicable to WTS series shown as follows, except where otherwise indicated.
Model
Description
WS305
IoT Weather Station Standard Version (Temperature, Humidity, Wind
Direction, Wind Speed, Barometric Pressure)
WS505
IoT Weather Station Pro Version (Temperature, Humidity, Wind Direction,
Wind Speed, Barometric Pressure)
WS506
IoT Weather Station Pro Version (Temperature, Humidity, Wind Direction,
Wind Speed, Barometric Pressure, Rainfall)
Safety Precautions
Milesight will not shoulder responsibility for any loss or damage resulting from not following the
instructions of this operating guide.
The device must not be disassembled or remodeled in any way.
In order to protect the security of the device, please change device password when first
configuration. The default password is 123456.
The device is not intended to be used as a reference sensor, and Milesight will not should
responsibility for any damage which may result from inaccurate readings.
Do not place the device close to objects with naked flames.
Do not place the device where the temperature is below/above the operating range.
Make sure electronic components do not drop out of the enclosure while opening.
When installing the battery, please install it accurately, and do not install the reverse or
wrong model.
Make sure both batteries are newest when install, or battery life will be reduced.
The device must never be subjected to shocks or impacts.
Declaration of Conformity
WTS series is in conformity with the essential requirements and other relevant provisions of the
CE, FCC, and RoHS.
Copyright © 2011-2022 Milesight. All rights reserved.
All information in this guide is protected by copyright law. Whereby, no organization or individual
shall copy or reproduce the whole or part of this user guide by any means without written
authorization from Xiamen Milesight IoT Co., Ltd.
