HDMI 2.0 6x1 Presentation Switcher with Audio Extraction
1
1. Product Introduction
Thanks for choosing the HDMI 2.0 6x1 Presentation Switcher. The switcher allows
selection of six different sources (three HDMI inputs, one USB-C input, one DisplayPort
input and one VGA input), and will switch the selected video to HDMI output. It supports
video resolution up to 4Kx2K@60Hz 4:4:4 8bit, 1080P, and 3D. In addition, there is the
smart built-in EDID setting can be selected by the 4-pin DIP switch on the rear panel.
The switcher supports stereo and multichannel audio on the HDMI inputs. In addition to
the audio embedded in the HDMI output stream, the audio is simultaneously
de-embedded to an optical digital audio output and a balanced analog audio output.
The switcher features multiple methods of control. When in the AUTO mode, the
switcher will automatically switch to the first detected source device. When the active
source is removed, the switcher will switch from input 1 to 6. The switcher can be
manually controlled by the front panel buttons, IR remote and RS232 command. CEC
allows the display device can be controlled by the front panel buttons and RS232 CEC
commands.
1.1 Features
Supports HDMI 2.0 and video resolution up to 4K@60Hz 4:4:4 8bit, 1080P, and 3D.
18Gbps high bandwidth and supports HDR 10.
HDCP 2.3 compliant.
Supports automatic switching.
CEC control for display volume and ON/OFF.
Controllable via RS232 and IR.
VGA resolution is selectable on the front panel.
Optical and balanced analog audio for audio de-embedding.
Smart EDID management for various application and customized setting.
