18Gbps HDMI+USB-C KVM Switcher KIT
17
6. RS232 control
6.1
RS232 control software
Installation: Copy the control software file to the control PC
Uninstallation: Delete all the control software files in corresponding file path.
Basic Setting:
Connect the switcher kit with all input devices and output devices needed, then to
connect it with a PC which is installed with RS232 control software. Double-click the
software icon to run this software.
Here takes the software
CommWatch.exe
as example:
The main view is shown as below:
Please set the parameters of COM number, bound rate, data bit, stop bit and the
parity bit correctly, and then you are able to send command in command sending
area.