Ground Mount Kit
www.milkcan.com.au
support@milkcan.com.au
(03) 9464 6964
56 Northgate Drive,
Thomastown VIC 3043
MCL13031
1.5
2 x Posts 1 x Cross Brace
2 x Cross Bars 1 x Accessories Bag
Your carton should contain the following parts:
Contents
Required
Tools
- Tape Measure
- Spanner
Optional
(if shortening width)
- Spirit Level
- Hack Saw
The Clothesline and Ground Mount Kit are 240cm wide. If your required width is less than 240cm, please refer to Reducing the
Overall Width below.
Choosing a Suitable Location
The recommended mounting height of the top slotted hole in the wall bracket is:
USERS 10cm.
Minimum height is 160cm.
20cm
20cm
- Cut half from each side of the 2 x cross bar
segments i.e. 40 / 2 = 20cm each side
- For this example, we are assuming your required
overall width is 200cm. This is a total reduction of
40cm.
Reducing the Overall Width
If your available space doesn’t allow the full 240cm
width, you can reduce the width of your Clothesline as
follows:
The cuts will be
covered by the
cross brace
Mounting
Post
Cross Brace
Cross Bar
