ULTRASONIC PORTABLE MILK ANALYZER
www.milkotester.com
-29-
Operating Instructions Master Pro
4.7.1 Control options when working with scales
Menu ->Settings-> Weighing scale
Calibration – serves for scales calibration (if there is deviation noticed).
For the purpose you have to have 2 standards of weight, for example
10 and 50 kg. After starting the following is displayed:
Using the buttons Up, Down, Enter (as it is done
when calibrating the rest of the milk analyzer’s
options) enter the weight of the lighter standard
of weight, in our case 10.00kg.
The same procedure is repeated with the heavy
standard weight, for example 50.000kg.
Measure – Off Line measuring mode, i.e. the analyzer is used as
universal scales. In this mode periodically control of the accuracy of
the scales with standards of weight is needed.
Scale ON/OFF – allows / forbids On Line weight scales work
(automatically transferring the kilograms measured milk from the
scales to the analyzer, after setting the deliverer’s number). If option
Enable is chosen, follow the way of work described above. If not, then
the operator has the possibility to enter manually liters and number of
the every deliverer.
4.7.2 Preparation for work and checking the scales
Put the scales on round and solid surface and level it, using its helical
legs.
Checking the scales is done by using 2 standards of weight – light and
heavy, for example 10 and 50 kg, in mode:
Menu ->Settings->Weighing scale->Calibration
In case there is discrepancy noticed, you need to make scales
calibration, as is described below.
4.7.3 Weighting delivered milk
The procedure is analogous to work when entering data for the
deliverer using additional keypad. The difference is that weight of milk
is automatically send from the scales.
Consequence of work is as follows: switch on the analyzer for
normal work. Place the vessel where the milk from different deliverers
will be collected. When the analyzer is ready for work, the operator has
to press “1,2,3,…” on the digital keyboard. Display shows the following:
Put Light Weight
10 kg
Set and press
ENTER
Put Heavy Weight
50 kg
Set and press
ENTER
