www.thomann.de
5
Loop mode
Press one of the three [LOOP PROG],
[LOOP SET] or [LOOP STYLE] buttons to
start the loop mode from the metronome
mode or rhythm-edit mode.
1. Press the [LOOP PROG] button, "LOOP
PROG" will flash. Use the [TEMPO/VALUE]
dial to select the loop group. Range: 1 to 16.
2. Press the [LOOPSET] button, "LOOP" will
flash. Use the [TEMPO/VALUE] dial to set
up how often the loop will be played. Range:
0 to 99.
3. Press the [LOOP STYLE] button. "STYLE"
will flash. Rotate the [TEMPO/VALUE] dial to
select the style. Range: 1 to 8.
4. Press the [MEMORY] button, "MEMORY"
will flash. Rotate the [TEMPO/VALUE] dial to
select the rhythm.
5. When parameters are changed, “EDIT” will
appear on the display. Press the [WRITE]
button. "LOOP PROG" will flash. Press the
[WRITE] button again. "LOOP PROG" will
flash quickly. When it stops, the current
parameters are stored. If you want to exit the
menu without storing the modified param-
eters, press the [START/STOP] button after
you have pressed the [WRITE] button for the
first time.
Rhythm-edit mode
Press the [STYLE] or [RHYTHM SET] but-
ton to start the rhythm-edit mode from the
metronome mode or loop mode.
1. Press the [STYLE] button, "STYLE" will
flash. Use the [TEMPO/VALUE] dial to select
the STYLE group to be edited (31 to 50 are
user STYLE suggestions).
2. Press the [RHYTHM SET] button, "BEAT"
will flash. Use the [TEMPO/VALUE] dial to
select the time signature (1/4, 2/4, 3/4, 4/4).
3. Press the [RHYTHM SET] button again,
"RHYTHM SET" will flash. Use the [TEMPO/
VALUE] dial to select the rhythm pattern
to be edited. The following five rhythms
are available:
. The sliders under
the LCD control the relative timbre of each
rhythm If there is a volume icon displayed,
it means this timbre is open. If there is no
volume icon, it means this timbre is closed.
4. When parameters are changed, “EDIT” will
appear on the display. Press the [WRITE]
button. "STYLE" will flash. Rotate the
[TEMPO/VALUE] dial to select the style
group (31 to 50 are available for user set-
tings). Press the [WRITE] button again,
"STYLE" will flash quickly. When it stops, the
current parameters are stored. If you want
to exit the menu without storing the modified
parameters, press the [START/STOP] button
after you have pressed the [WRITE] button
for the first time.
5. The tempo default setting in the rhythm-edit
mode is 120 beats per minute (bpm). Press
the [TAP] button to change the tempo. Press
the [TEMPO] button to change to the metro-
nome mode.